wii软改直出RGB方案 RVLoader v1.3 Aurelio92

wtpmsing

RVLoader

This repository contains the source code of RVLoader, a Game loader specifically designed for Wii portables. It's supposed to completely replace the Wii's menu with a custom interface, that has full Gamecube controller and Wiimote support.

介绍

     通过 Hiidra 从 USB 加载 Wii 游戏
     通过 Nintendont 从 USB 加载 Gamecube 游戏
     直接 Homebrew 加载 [包括 ELF 支持]
     Wii 频道支持
     支持 VirtualConsole/WiiWare 游戏 [实验]
     Built-in installer that automatically detects if RVL is not installed and prompts the user to install it
     Front-end completely developed from scratch and with Wii portables in mind
     如果找到 MX 芯片 [RTC]，则集成系统时钟
     广泛的 LUA 集成可实现更大的定制
     完整的 Wiimote 和 Gamecube 控制器支持
     自定义主题集成

Hack

     VGA补丁【使Wii输出VGA视频信号】
     NoWifi 补丁 [即使没有 Wifi 模块也能使 Wii 启动]
     GC2Wiimote [允许使用 Gamecube 控制器玩 Wii 游戏]板
     不再需要蓝牙模块来启动 Wii 游戏

定制 PCB底板支持

     集成 GC+2.0 和 PMS2 设置
     Per-game GC+2.0 [自定义控制器PCB]可重映射按钮
     RVL-DD【DirectDrive自定义PCB】游戏内亮度设置
     UAMP2 [带屏幕控制的自定义音频放大器]

wtpmsing

Install

In order to install RVLoader you need to have your Wii already hacked (e.g. the homebrew channel is installed) and updated. Then simply follow these steps:

1.Unzip the archive in the root of your USB drive, making sure to merge the folders and not replacing them (to keep all the other homebrews that you might already have)

2.Plug your USB drive in your Wii and turn it on

3.Boot RVLoader from the homebrew channel, postloader or whatever you have

4.RVLoader will detect if it is not installed currently and ask you to do it

5.Press A to launch the installer

6.After the initialization is complete the installer will perform a sanity check. If it complains about missing some IOS modules check the note at the end.

7.Select if you want to patch out the WiFi module and if you want VGA. If you don't have the WiFi module on your board or you plan on removing it,
    PLEASE, make sure to have the "Patch out WiFi" option set to yes.

8.Once you have selected the wanted options, press Start/Home once.

9.The installer will show you the selected options and ask for confirmation. To proceed hold Start/Home for a couple of seconds until the process starts.

10.Wait until the end of the process, it should take about a minute and then exit to RVLoader.

From now on RVLoader will boot automatically when turning your Wii on.

NOTE: If step 6 fails: RVL installer grabs the required IOS modules from your Wii's NAND. If your Wii is not updated, it might be possible that the installer won't be able to find some of the required modules. In this case the installer will try to get those modules from the following IOS wads that must be placed on the root of your USB drive:

    IOS36-64-v3608.wad
    IOS58-64-v6176.wad
    IOS80-64-v6944.wad

These files can be legally downloaded through NUS Downloader: http://wiibrew.org/wiki/NUS_Downloader

U侠

机翻也看不懂
楼主敲几个汉字说明一下重点撒.......

花卫军

图也没有！

minimal

这么多英文,还没有图

qqwangxin

兴奋的心情能理解，但是这个一般人也弄不了，输出vga除了rgb还有h v 两个点，不拆机就弄不了，本来就是为了做wii掌机而开发得系统，对主机玩家没什么用。向我们这样能做掌机的，也不会给别人改vga输出。

rp14w

感谢大佬技术分享

isayican

价格肯定比WIIU贵吧，WIIU也支持WII和NGC吧还是点对点，意义在哪？就是可以带电池？价格七八百以下，才会有点兴趣吧

Johnny-z

完全不懂，觉得非常厉害

cusuyu

哪位如果有软破vga成功了 麻烦发个详细教程...vga同步信号可以从视频信号提取...