[D2C读D9刻录问题解决]现贴出解决办法，不用下ISO，不用下补丁，只须重新刻一张D9：

bloodflower

解决办法：

1。准备一张高质量D9刻录碟（一定要用+R，威宝的就可以。目前不知道-R是否可以）
2。用较低的速度刻录
3。打开ImageBurn, 选择“tools->setting->write->layer break(分层点)->User specified and type 2084960
4。刻录
5。问题解决，已证实！很多用D2C的人已经玩上了

感谢西班牙Wiinja小组！

PS:虽然本人还没有测试，现在在上班，家里也没有+R，可能不会很快出测试结果，但是老外已经测试过了，连接：http://psx-scene.com/forums/d2ck ... no-work-d2ckey.html

如果不放心的话，就再等两天，在这里搞人身攻击的，就免了吧。

剩下的自己看吧，下面贴出原文：

Again, complimentary LITERAL translation. No problem.

* This fix doesn’t confirm that 100% of the owners of wiinja deluxe original can play dvd9 ssbb but will help many of them.
* Use High/Excellent quality DVD+R DL (Verbatim DVD+R DL & MEMOREX DVD+R DL tested)
* Use a DVD9 ISO and tested-as-working-properly burner.
* Burn the DVD at a slow speed.
* Open IMGBURN, select to write iso to DVD, select DVD9, click in TOOLS, SETTINGS->Write->Layer Break->User specified and type 2084960. Burn the DVD.
* Enjoy

NOTES:

* White screen + Japanese green text = Wii reader doesn’t like the DL media and can’t find second layer
* White screen and dvd turning with no text= DL Media w/o Layerbreak fixed.
* DVD9 DL Original & Backup require excessive laser use, forcing and abusing it will provoke future damage in your laser taking the risk of damaging … use at your own risk!
* If your drive gives 3 dry noises (like TOC,TOC,TOC) your reader is defective or dirty or not capable of reading DL
* SSBB Import Backup will create some new Japanese channels in your wii after you update with it …
* All of you that can load the game alter this help will see that the [wiinja] chip is perfectly capable to read DL, other faults like erroneous readings or hang ups are due to the reflexion index of the dvd, because the wii drive is not capable inclusive of reading correctly the original discs like it has been reported by hundreds of users to Nintendo.
* Once the game loads, we should check to see if we observe delays in the audio, go to the options menu and turn off the option Deflicker (a wrench icon) and then re-run the game.

We work exclusively to support Wiinja Deluxe, but we know that the information about this fix is going to be used by clients of different commercial chips that have had the white screen problem and we are happy that the whole community can enjoy this backup….

God bless your lenses
Wiinja Team 2008

So in short, he says to use that hard layerbreak setting. I believe this does NOT work with DVD-R DL media, only DVD+R DL, so your call if you wanna try. Also, I'm unsure if the layerbreak will leave enough space etc on the second layer etc (running to get my calculator and tables), but the best thing to do is for you to just test it and, if it all works fine w/o problems, then you know that the dc2key has an issue with reading past that layer mark and that's it. No more speculation whether the iso was dumped this or that way and whether it could produce this or that problem with this or that chip or if it was patched for wiikey or other (unlikely) rumors.

On the other hand, if not a single one of your can get the game FULLY running after this "fix", then we can meet again and try to figure it all out.

So who wants to report first?

PD: If you DO get it to work ... can you try using the exact same thing you just did, same media, same burner, same everything but leaving the layerbreak to "automatic" in the recording software (like it's being done until now) and see if it also works? I have the feeling this is just optional ... although indeed an optimal layerbreak would improve readability by avoiding both, the outermost part of the media and a bit of the inner most second layer ring.

PPD: I alread looked it up. Corresponds to the 3,98GiB mark, if not mistaken ... but this is a full raw iso 7,93GiB ... isn't this layerbreak too low and it will just push the end of the second layer into the unreadable zone? In short, won't this be equivalent to taking off aprox. 404MiB off the end of the iso? Hope there is nothing important there.

PPPD: Bad math indeed. Should fit. Was thinking BACKWARDS as usual.

周防達哉

沙发，对于D2CKey用户确实是个好消息，但因为大乱斗他们也够折腾的了，浪费了不少D9盘啊

wangzheyi

不错啊，但愿是真的！！！

ljjunex

果然是分层点的问题，2084960可能是原版游戏的分层点，难道D2C只读原版镜像？

wangzheyi

有个问题

既然是分层点的问题，为什么wiikey可以读出和原版不一样的分层点呢？

bloodflower

下面是引用wangzheyi于2008-02-14 10:03发表的Re:[D2C读D9刻录问题解决]现贴出解决办法，不用下ISO，不用下补丁，只须重新刻一张:
有个问题

既然是分层点的问题，为什么wiikey可以读出和原版不一样的分层点呢？

当然是Wiikey的兼容性好啦，Wiikey的兼容性世界第一

风在天

汗，偶镜像已经删了，浪费了2张D9片，20一张啊！！！

ljjunex

下面是引用风在天于2008-02-14 10:24发表的:
汗，偶镜像已经删了，浪费了2张D9片，20一张啊！！！

用你刻的盘重做一个镜像就行了呀，用imgburn就可以做。

炽蓝

太好了，总算等到了，还好镜像没删

专属她的猫

那分层点和原版镜像不一样的D9刻盘有什么问题这个小组有说明么？？
D2C的兄弟们赶紧试试～～～～～～～