MG2以及MSX2实体机磁碟相关疑问

该用户已被禁言

最近入了索尼当年做的msx2以及小岛早年的神作mg2ss，无奈密码存档实在太蛋疼了。想搞张磁碟做磁碟存档……

想问下有大神研究过msx主机嘛？存档用磁盘有什么规格要求？还是普通的3.5？英寸就行？

ykfox

绝对牛逼啊 这游戏太贵了 楼主花了不少米吧 这老古董没几个人折腾的 我N年前国外下过这个游戏的详细说明
晚上回去找找看有没有关于磁盘存档的说明

该用户已被禁言

ykfox 发表于 2018-6-22 17:15
绝对牛逼啊 这游戏太贵了 楼主花了不少米吧 这老古董没几个人折腾的 我N年前国外下过这个游戏的详细说明
晚 ...

游戏加机器差不多一台ps4pro价格

ykfox

kissdreams 发表于 2018-6-22 17:24
游戏加机器差不多一台ps4pro价格

找到了 你参考一下

SAVE/LOAD

In this game, you can save and load during gameplay. You can enter the "Save/Load Screen" by pressing the F5 key in the game, or by selecting SAVE/LOAD from the GAME OVER screen. To return to the game screen after you have entered this mode, press F5.

There are 3 methods to save or load:
1. By using passwords.
2. SRAM. Game Master 2 cartridge (RC755) is required.
WARNING : Current fMSXs do not support this function!!
3. Disk. Requires a disk drive and a 720k 3.5 inch floppy disk.

If you are playing with fMSX, do not forget to format 'drivea.dsk' or whatever disk image you use to save your Metal Gear 2 files, or you will fail to save.

How To Create A Save Disk

1. Run fMSX without any disk image or external ROMs (such as game ROMs) specified. (Ex: Just type "fmsx-dos", from MS-DOS)

2. You will enter MSX BASIC. Type in "CALL FORMAT" and press ENTER. The current disk image (always drivea.dsk) will be formatted.

NOTE: If you wish to use a name other than "drivea" you must specify one! Type "fmsx-dos -diska NAMEOFDISK.dsk" (Ex: "fmsx-dos -diska MG2SAVE.dsk")

If you use a different name, a batch file with the appropriate commands must be created.

3. Quit fMSX, and start playing Metal Gear 2!!


How to Save

If you select "SAVE" in the Save/Load screen, you will be prompted to choose between the following saving methods. SRAM will not be displayed if you do not have the Game Master 2 Cartridge in slot B.


(1) Passwords
Select "PASSWORD" in the Save screen, press SPACE key, and a password will be displayed. Accuracy is important! Make sure it's correct when you write it down!

(2) SRAM
Select "SRAM" in the Save screen, press SPACE key, and choose a filename.

Then the data will be save into SRAM.

(3) Disks

Select "Disk" in the Save screen, press SPACE key, and choose a filename. Then the data will be save into disk.

Just like SRAM, 3 filenames are available - SNAKE1, SNAKE2, and SNAKE3.

Move the cursor to specify a filename.


NOTE: Make sure to use formatted disks as your save disks. To format a real disk, refer to your MSX manual.

How to Load

If you select "LOAD" in the Save/Load screen, you will be prompted to choose between the following saving methods:

(1) Passwords
Select "PASSWORD" in the Load screen then you will enter key input mode. Enter the password you saved (wrote down) with the keyboard. When you finish, press the ENTER key. If the password is correct, the game will be loaded.

(2) SRAM

Select "SRAM" in the Load screen, press the SPACE key, and choose a filename. The game will load.

(3) Disks

Select "DISK" in the Save screen, press the SPACE key, and choose a filename. The game will load.

adsl95

既然提示磁盘无法读取错误,你还是看看是不是盘跪了吧...........
去年我折腾软盘,九几年买的那些里面90%的软盘都读不出来了,5%能看见目录但复制到硬盘就错误,那5%是正常的...........
实话讲,软盘质量不敢恭维,存到现在应该不少都挂了............

luster

软盘坏了就麻烦了，不知道是否通用型号，如果通用买个u盘仿真软盘

listing01

好像是2.8寸的quick disk,与famicom disk system通用

ykfox

附上最近 ***搬运的msx2 合金装备 详细开箱视频 虽然没有字幕 但游戏说明书是一页一页展示的 非常仔细
https://www.bilibili.com/video/av26404170

葛雷新

MSX2的游戏不是卡带吗？

爱小熊

希望楼主多发图，这类早期电脑看着比什么老主机诱人多了。