现在的固件分别是4.3的ps3，没有光驱，如果匹配一个光驱？

derick

有2台机器，厚机是4.2的固件，薄的是4.3固件。

都没有光驱。

有办法给它们陪一个光驱吗？

该用户已被禁言

配一个光驱

derick

暴雨fashion 发表于 2015-3-14 14:48
配一个光驱

如何匹配

gundam008

不明觉厉，不知道。

该用户已被禁言

要和cpu对码，没有光驱无法开机吧。这个得找会提取固件，会编程的。不行就便宜卖了，让有能力的人复活他们吧

derick

降到3.55 就可以重新嫁接了。

Remarry guide for 3.55 firmware

1. Have the console on a working 3.55 firmware

2. Download the Remarry files (remarry-3.55.rar) and unpack to root of USM Mass Storage device.
   The following line is already changed from 1 to 0:

     #---------------------------------------------
     # Install Systemsoftware
     #   0 = ŽÀs‚µ‚È‚¢
     #   1 = ŽÀs‚·‚é
     #----------------------------------------------
     0
   
   This will make sure the drive init PUP is not installed, thus preventing RLOD because of syscon hashes on downgraded consoles.
     
3. Download official firmware <=3.30 as drive init PUP and put it root of USB Mass Storage device

   Content of USB Mass Storage device should be thus be:

                                           MD5:                               SHA1:                                      CRC32:     CRC16:
     Lv2diag.self                          C48E5EBFC00ABD89094CB73A2B0BEA59 / D229AC694910272DDEA9276B9FD4A2664800638C / C2D0A2B0 / 5327
     manufacturing_updater_for_reset.self  9E3C9024E9243478D21C78E1C9DF2376 / 922EA202CA2EA36EBF2B5054605E17409B9A56E6 / 93F18A95 / EA0D
     fdm_spu_module.self                   33E8D3C12349CFD203930FD0C237054D / F660FD6EBEB12DC7F52B4E707A1F0D1BD05DF9F3 / 85701A9B / B75B
     PS3UPDAT.PUP
     cfg/standalone.cfg

4. Put the service mode JIG/dongle/PSGrade into port 0 (closest to the reader) and get into factory service mode.

5. Put the created USB Mass Storage device from step 3 into port 0 (closest to the reader) and run.

     Drive Init Executing  means it is starting the remarry process
     Drive Init Failed with big pink letters 'NG' (No Good!)  means the process failed. Most likely solved by fixing the communication issue with the drive.

6. After you run the initial remarry process, do not take it out of factory service mode.

7. Put a BD movie disc in and run it on the PS3. (This restores your DRL files!)

8. Then you can take it out of factory service mode.

9. Launch as normal.


Other related references:

Official Firmwares    : http://www.ps3devwiki.com/wiki/System_Software
Remarry               : http://www.ps3devwiki.com/wiki/Remarry_Bluray_Drive
Dehashing             : http://www.ps3devwiki.com/wiki/T ... e_shorter_reFSM_way
Downgrading           : http://www.ps3devwiki.com/wiki/Downgrading_with_Hardware_flasher
PSgrade guide         : http://www.ps3devwiki.com/wiki/Downgrading_with_PSgrade_Dongle
PSgrade devices list  : http://www.ps3devwiki.com/wiki/T ... with_PSgrade_Dongle
Bluray Drive info     : http://www.ps3devwiki.com/wiki/Bluray_Drive

szb005

降到3.55后用光驱对码软件就能搞定，不过厚机无光驱要降到3.55是重点。。。