M2的***芯片要如何才能玩PS的游戏啊？

原振侠

和看DVD一样,按住RESET键至灯变红.
按住出仓键至仓门弹出.
放入PS游戏碟或者DVD.再按一下回仓.就可以了.

sidol

Originally posted by 原振侠 at 2004-4-7 11:21:
和看DVD一样,按住RESET键至灯变红.
按住出仓键至仓门弹出.
放入PS游戏碟或者DVD.再按一下回仓.就可以了.

大哥，我试了，可是不行呀！还有什么办法吗？读的PS游戏是不是要正版的啊？:D

停顿

开机  放碟  点三下 RESET键进仓就可以了   我的39001加M2就是这个用法  你可以试试~~~~~~！

lxnpu

正版的for V9/V10的M2的PS/DVD模式－－待机状态下按Eject 大约5秒开机，当初我也是看网上他们人云亦云的Reset N秒开机，其实没几个人真正试过。

sega

先把电源按值红灯待机状态，然后按住RESET键，到出现SONY字样松手就行了

lxnpu

Originally posted by sega at 2004-4-8 19:36:
先把电源按值红灯待机状态，然后按住RESET键，到出现SONY字样松手就行了

BOOTING PS2 ORIGINALS (CD or DVD, DVD9 ALL REGIONS)

   Switch on the PS2 to STANDBY (red light) and press EJECT to open the disk tray

   Insert the game into the disk tray and press EJECT or RESET to close the tray & boot the game

BOOTING PS2 BACKUPS (CD-R or DVD-R ALL REGIONS)

   Switch on the PS2 to STANDBY (red light) and press EJECT to open the disk tray

   Insert the game into the disk tray and press EJECT or RESET to close the tray & boot the game

BOOTING PS1 GAMES (CD or CD-R ALL REGIONS )

   Put the PS2 into STANDBY mode (red light)

   Press and hold EJECT for at least 1 second to open the disk tray and set PS1/DVD mode

   Place the PS1 game into the disk tray and press EJECT to close the tray. The game will boot.

   You can also tap RESET and the PS2 will remain in PS1 mode and boot the game.

PLAYING LOCAL REGION DVD/DVD-R MOVIES

   Put the PS2 into STANDBY mode (red light)

   Press and hold EJECT for at least 1 second to open the disk tray and set PS1/DVD mode

   Place the movie into the disk tray and press EJECT to close the tray. The movie will play.

   You can also tap RESET and the PS2 will remain in PS1/DVD mode and play the movie.

PLAYING OUT-OF-REGION DVD MOVIES (Needs AR2/v2 or GS2/v2 or DVD Region X)

   Put the PS2 into STANDBY mode (red light)

   Press and hold EJECT for at least 1 second to open the disk tray and set PS1/DVD mode

   Insert AR2/v2, GS2/v2 or DVDRX into the disk tray and close the tray. It will boot.

   At the menu, select DVD MOVIE PLAYER and press X on the controller

   The disk tray will eject; remove AR2/GS2/DVRX and put the out-of-region movie into the tray

   Press EJECT or tap RESET to close the tray and wait for a few seconds

   If the Browser appears, select the gold disk and press X to complete the boot

DISABLING THE MESSIAH 2 (e.g. PS1 anti-mod protected game)

   Put the PS2 into STANDBY mode (red light)

   Press and hold EJECT for at least 5 seconds to open the disk tray and set sleep mode

   Place the game into the disk tray and press EJECT to close the tray.

   You can also tap RESET; the PS2 remains disabled and boots the in-region original game.

   Using this procedure means that the game must be the same as the PS2 region

   The Messiah 2 is disabled until it has been put back to STANDBY and booted normally

sidol

看不懂，不过还是谢谢你！

lxnpu

Originally posted by sidol at 2004-4-11 01:37:
看不懂，不过还是谢谢你！

PS Mode：待机状态下按Eject至少1秒开机

该用户已被禁言

楼上说的是正确的，待机状态下，按住出仓键不放4、5秒钟，然后放入PS游戏，按RESET键一下就可以了。