JR更新了

Xbox3601974

J-Runner v0.2 Beta (Build 284) – Includes Sonus 360 Custom Sounds & DGX Support !
The eagerly anticipated next big version of J-Runner has finally been released. now includes Custom Sounds for the Xecuter Sonus 360 and full support for the Xecuter DGX v1.0S !

Xecuter Sonus 360 Custom Sounds:
Now you can convert your own WAV files to play your own custom Power ON, Power Off, Eject and CoolRunner Glitch cycle sounds – it really is a lot of fun to use
We encourage you to post your own custom soundpacks for others to use !

Xecuter DGX:
You can now use J-Runner to dump your NAND (any version slim motherboard, any dashboard version) – patch with the DGX ECC and then recover your CPU KEY. We recommend you use the USB COMMS Cable (its the same as the NAND-X USB Update Cable if you already have that)

The new DGX Support Forums are here: http://team-xecuter.com/forums/forumdisplay.php?f=196

Here is the full changelog with many new additions, tweaks and fixes

Build 284

Added DGX support
Added Sonus Custom Sounds
Added SMC Config Editor
Added Erase for Corona 4GB (F2 for an alternative erase method)
Added Custom XeBuild Command
Rewrote Functions for NAND-X/JR-P
Changed way it saves settings
Added support for new ISD chip (Sonus 360)
Patch kv OSIG list updated
Patch kv Serial and Console ID added
Added rev option on Advanced XeBuild Options
Lots of various enhancements, bug fixes, optimizations
Download HERE

Here is a video grabbing a previously impossible to recover CPU KEY from a Corona v4 with 15574 dashboard.
Hardware Used:

Xecuter DGX v1.0S
Xecuter JRP/NANDX/CR – Corona QSB Install Kit V3
Xecuter J-Runner USB Comms Cable

,万众期待的下一个版本的j跑步者终于被释放。now includes Custom Sounds for the Xecuter Sonus 360 and full support for the Xecuter DGX v1.0S !现在包括自定义听起来的Xecuter直到找到Sonus 360和全力支持对Xecuter特v1.0S !

Xecuter Sonus 360 Custom Sounds:360年Xecuter直到找到Sonus定制声音:
Now you can convert your own WAV files to play your own custom Power ON, Power Off, Eject and CoolRunner Glitch cycle sounds – it really is a lot of fun to use现在您可以转换您自己的WAV文件玩自己的定制电源,关闭电源,喷射和CoolRunner故障周期——这真的是一个听起来很多有趣的使用
We encourage you to post your own custom soundpacks for others to use !我们鼓励你把你自己的自定义soundpacks给他人使用!

Xecuter DGX:Xecuter特:
You can now use J-Runner to dump your NAND (any version slim motherboard, any dashboard version) – patch with the DGX ECC and then recover your CPU KEY. 您现在可以使用j runner甩掉你的NAND闪存(任何版本苗条主板,任何仪表板版本)-补丁与特ECC然后恢复您的CPU的关键。We recommend you use the USB COMMS Cable (its the same as the NAND-X USB Update Cable if you already have that)我们建议你使用USB通讯电缆(其一样的nand x USB更新电缆如果你已经有了,)

The new DGX Support Forums are here:新的特支持论坛在这里:http://team-xecuter.com/forums/f ... umdisplay.php?f=196

Here is the full changelog with many new additions, tweaks and fixes这是完整的changelog和许多新特性,调整和修正

Build 284建造284

Added DGX support补充道特支持
Added Sonus Custom Sounds添加自定义声音直到找到Sonus
Added SMC Config EditorSMC配置编辑器添加
Added Erase for Corona 4GB (F2 for an alternative erase method)添加删除对电晕4 gb(F2的另一种消除方法)
Added Custom XeBuild Command添加自定义XeBuild命令
Rewrote Functions for NAND-X/JR-P重写函数与非x / jr p
Changed way it saves settings改变方式设置保存
Added support for new ISD chip (Sonus 360)添加支持新的ISD芯片(直到找到Sonus 360)
Patch kv OSIG list updatedOSIG列表更新补丁千伏
Patch kv Serial and Console ID added补丁kv系列和控制台ID补充道
Added rev option on Advanced XeBuild Options添加启选项先进XeBuild选项
Lots of various enhancements, bug fixes, optimizations大量的各种增强、bug修复、优化
Download HERE在这里下载

Here is a video grabbing a previously impossible to recover CPU KEY from a Corona v4 with 15574 dashboard.这是一个视频抓住一个以前不可能恢复CPU关键从电晕v4 15574仪表板。

Hardware Used:硬件使用:

Xecuter DGX v1.0SXecuter v1.0S特
Xecuter JRP/NANDX/CR – Corona QSB Install Kit V3Xecuter JRP / NANDX / CR -电晕信号衰落了安装工具包V3
Xecuter J-Runner USB Comms CableXecuter j runner USB通讯电缆

tomone

完全看不明白啊。。。

期待楼下大大们解释下

该用户已被禁言

又能看懂的同学没

mingff198113

谷歌翻译的  呵呵

╋头痛

下来看看，谢谢DDDDDD

deathmoon1118

谢谢分享，等很久了