一张MS卡来运行1.5破解的方法...寒啊

该用户已被禁言

PSP v1.50 Single Memory Card Exploit:
-How to start with one Memory Stick
Files Required: swaploit_1.5_psp-dev.rar
PC Requirements: You must have a PC Memory Stick reader
***Warning Points***
-Must wait several seconds taking into account the Memory Stick writer's delayed writing
-You must create a batch file
-About 10 seconds is OK, but keep an eye on pulling out the stick too quickly or too slowly depending on delayed writing
Preparations
1. Create a BAT file. I made mine "Autorun.bat". Use a text editor and insert the below, and save it.
From here*********************
ren I:\psp\game\psp-dev\eboot.pbp eboot.pbp3
ren I:\psp\game\psp-dev\eboot.pbp2 eboot.pbp
To here***********************
Where "I" is your machine's Memory Stick writer drive letter. Please change it depending on your needs.
2. Copy EBOOT.PBP to MS1's PSP\GAME\PSP-DEV\ folder.
3. Rename the EBOOT.PBP file inside MS2 to EBOOT.PBP2, and copy it to the above location.
4. Copy all necessary files of the software you want to run beforehand.
5. Open your PC's command prompt.
6. Use the CD command to get to the directory of the BAT file you created >> example: CD c:\psp15\
7. In the command prompt, type in "autorun.bat" (but do not push ENTER yet)
You're ready to go.
Usage
1. Insert the Memory Stick into your version 1.5 PSP.
2. Start the loader.
3. The instant it starts, immediately remove the Memory Stick and insert it in your PC's Memory Stick writer.
4. Press the ENTER key on your PC, and the BAT will rename the files.
5. Wait about 2 to 3 seconds. The rename process has completed, but since there is delayed writing, hold on for a bit...
6. When you think, "it's done," remove the Memory Stick and insert it in the PSP.
7. The software will start if you've done it correctly.
********************
Supplement to single Memory Stick startup
You will need to re-rename the files to get them to start again, and I made a re-rename BAT file so I will share its contents.
Paste this into a text editor, name it "autoback.bat", and it should be alright if you put it in the same folder as you put your autorun.bat.
If you want to start software using the single Memory Stick, insert the stick in your PC and run the "autoback.bat" file from the command prompt. This will re-rename the files, and the stick will be returned to its "loader" state.
From here****************
ren I:\psp\game\psp-dev\eboot.pbp eboot.pbp2
ren I:\psp\game\psp-dev\eboot.pbp3 eboot.pbp
To here*********************



寒一个...10秒...不得不佩服啊... .

爱吃蔬菜

阅毕....好麻烦.......

暴发户888

中国人请讲中国话！！！谢谢！~！谢谢合作