本帖最后由 badzbb 于 2011-12-11 16:27 编辑
**** THIS SOFTWARE WRITES TO THE PS3 EEPROM – USE AT YOUR OWN RISK ****
**** 这个软件会写入PS3 EEPROM – 自己承担使用风险****
After having to QA a few PS3 in a row. Then installing a different firmware straight after, it was time to cut out the middleman.
Toggle QA will SET/RESET the QA Flag and Token on any 3.41 or 3.55 firmware that has lv1 mmap and lv2 peek and poke patches (which is most of them).
When you run the app it first detects if the PS3 is 3.41 or 3.55. Next it will check if your firmware has any of the required lv1 patches already and only patch the hypervisor with the ones you need. After it finishes patching Toggle QA will check the status of the QA Flag and SET/RESET it accordingly. Then once the QA SET/RESET is done any lv1 patches made will be removed.
HOW TO USE:
1: Install toggle_qa.pkg（安装toggle_qa.pkg）
2: Run Toggle QA from XMB（从XMB界面运行Toggle QA）
3: PS3 will beep and return to XMB. (If you do not hear a beep it has not worked)（PS3将发出三声“滴”的声音之后返回XMB。如果你没听到“滴”的声音说明Toggle QA没工作。）
NOTE: Every now and then it will hang on the lv1 patching stage. If it has not beeped and returned to the XMB after about 30secs you will need to reboot and try again.
（现在它将挂起LV1打补丁。大约30秒之后如果没有发出“滴”的声音就返回XMB，你将需要重启PS3并且重新尝试。）
Enjoy.
~Codename: REBUG
Credit and Thanks:
Big thanks to graf and the glevand for the hypervisor work.
Everyone involved in getting the QA Flag/Token working back many moons ago.
测试结果：
我刚刚在自己的Rebug 3.55.2+0.5补丁的系统上测试过了，把XMB界面切换回Retail Menu，然后选中XMB界面的设置->网络设定（不要进入），按住手柄的L1+L2+L3+R1+R2+方向下键确实可以调出3个选项：Edy Viewer（不知道干嘛的）、Debug Settings（和Rebug系统的Debug菜单功能相同）、Install Package Files。
非Rebug系统应该也可以调用出Debug Settings菜单（待验证）。
是否能够自由升降级？（未知）
是否能上PSN？（未知，我测试的是3.73伪装，PROD-QA、RC服务器进去就要求升级，不知道伪装4.0会怎样）
QA Flag的开启其实在半年前就有人讨论了，据Mathieulh大神说“他打开了隐藏的刷写系统选项，并去除了所有的升降级限制”。开启QA Flag也就是开启了主机的工程模式！
注意事项：
1、小白禁止尝试，出现任何问题本人概不负责！
2、仅供有兴趣的同学研究，不明白的可以搜索关键词“QA Flag”，你将找到答案。
Download：
http://115.com/file/dnrpsedb
| 
川公网安备 51019002005286号
楼主
发表于 2011-12-11 23:25 · 广东
看看。。。。
