- 精华
- 0
- 帖子
- 1857
- 威望
- 0 点
- 积分
- 2080 点
- 种子
- 0 点
- 注册时间
- 2004-2-1
- 最后登录
- 2022-2-1
|
发表于 2011-5-19 21:39 · 天津
|
显示全部楼层
LT+固件升级到13146后的初步测试结果(没备份原始固件KEY的千万别升)
本帖最后由 rebeen 于 2011-5-19 22:20 编辑
XBOX 360 ISO上已经有刷LT+的机器更新完毕,发出了初步的测试结果,以下为原文:
1. When my flashed Xbox 360 connect to Xbox live and did an update, the dvd drive was back to brand new original firmware which causes :
- No burned games works
- No NON-JTAG thing works.
2. I reflashed my Xbox 360 with LT+ v1.1 firmware after that update :
- Burned games work again except all AP25 games we have known ( black screen remain till you reset the console ). I just tested with those AP25 games and some games I am playing, here is result :
+ Fable 3, Assassin's Creed Brotherhood, NFS Hot Pursuit, Halo reach, Modern Warfare 2, Black Ops don't work anymore since they maybe have new AP25 check ( 6 AP25 games had been pre-patched with latest AP25 through current abgx software ( v1.0.5 ). For some reports before, people said Black Ops and Modern Warfare AP25 were removed on new dash, but sorry this is wrong, they have new AP25 and we have to wait till new AP25 patches release.
+ Super Street Fighter 4, Fifa 11, L.A. Noire still work as normal. These are games I'm currently playing.
+ Non-JTAG things wont work anymore, even you reflash your console or not, these incredible things are completely gone for now.
3. As some rumors before, the xbox itself will reflash the DVD drive back to original ( everytimes it reboots, this is completely wrong because after the update, I reflashed with LT+ firmware then reboots my xbox about 10 times and the LT+ still there, no problem with it.
PS : I have Lite-on 93450c on Jasper v2 ( MFR date : 2009-11-09 ).
I don't have BenQ or Samsung Drives, so if anyone asks for information about these drives, please wait for other people who using these to report.
大致意思:
1.更新完毕后,光驱确实被重写为最新原版官方固件
2.更新完毕后,重刷LT+,出现以下结果:
+除了带AP2.5的游戏(打过补丁也没戏)以外均能正常运行(AP2.5游戏有神鬼3,兄弟会, 极品飞车Hot Pursuit, 致远星,COD6, COD7)
+超级街霸4, Fifa 11,黑暗洛城这几个游戏运行正常
+Non-JTAG(就是通过某个特定的设定档免费玩随选游戏和小游戏)的全军覆没
3.升级完后再刷LT+固件,光驱固件不会再次被自动刷回原版(非以前流传的每次开机都会自动刷回原版固件)(但这并不意味着微软没有发现和记录你的机器信息)
报告者的机器型号为 Lite-on 93450c Jasper v2 ( MFR date : 2009-11-09 )
报告者没有以前超老的三星和明基光驱,无法测试这两种是否一样的结果
报告者进一步补充:
+如果你想在更新后刷回LT+固件,请确认你已经备份了你的DVD KEY,如果在升级之前没有备份,很悲剧,升级后刷不了LT+了
+个人理解:需要等待新的固件才能玩转以后的XGD3
原文:
+You must have your dvd's key before doing the dashboard update, if you dont backup the key right now, after doing update, your console will have brand new firmware with currently unreadable firmware. And you won't be able to play burned game from now on. Just get the key, do the update, then reflash it with saved key.
+To my understand, we must wait for LT+ v2 firmware releases, flash the drive with it to play new format disc ( XGD3 )
+另一帖报告:确认明基光驱升级后也会被重写,当再次刷回LT+时,序列号发生改变
原文:I can confirm BenQ drive was 'reflashed' (more on this in a minute) after update. Upon re-reflashing it, it works fine with games not having AP25...
However, when re-reflashing my drive, I did notice that the serial info was all 0's (may have been one that wasn't a 0, I was in a hurry), none the less the serial stuff was all fuxor'd... just reloaded old FW and re-flashed in a jiff...
Can't wait for new patch to AP25... already miss my COD:BO |
评分
-
1
查看全部评分
-
|