[破解][转载]Freeboot 0.031新手安装图文指南（英文）

humor

原帖地址：
http://www.se7ensins.com/forums/topic/196288-install-freeboot-0031-pics-noob-friendly/


说明一下，Freeboot已经支持单Nand了，就是说不需要额外的什么芯片，所有符合JTAG破解条件的机器都可以安装，已经刷了XBR的同学可以直接用Flash360进行刷新，很方便的

不知道是什么东西的请移步 https://bbs.luryl.com/viewthread.php?tid=1453349&fpage=1


Ok guys I tried to build my own p_w_picpath to see how easy it is and I was successful but I didn’t flash my 360 so please correct me if something is wrong here

(my only concern is that I obtained the smc.bin from Cygnos360 V2 SMC Collection.zip)This was done on Vista 32-bitTools needed:

1) Auto Xbins : Auto Xbins[/COLOR]
2) freeBOOT-0.031.zip from xbins : /XBOX 360/development/freeBOOT/
3) 9199.zip from xbins: /XBOX 360/development/freeBOOT/
4) Cygnos360 V2 SMC Collection.zip from xbins: /XBOX 360/development/Cygnos360/
5) libeay32.zip libeay32[/COLOR]
6) Your original nand p_w_picpath (**DOES NOT NEED TO BE 7371**)
7) Your CPU key


1. First things first open up freeBOOT-0.031.zip and extract it to your desktop

Resized to 74% (was 821 x 587) - Click p_w_picpath to enlarge[/COLOR]

2. Open up the libeay32.zip and extract the libeay32.dll to the freeBOOT-0.031 folder:
Resized to 70% (was 864 x 540) - Click p_w_picpath to enlarge[/COLOR]

3. Take your original nand dump and for the sake of the guide rename it to original.bin, after put that file original.bin into your freeboot-0.031 it should look like this:
Resized to 70% (was 865 x 537) - Click p_w_picpath to enlarge[/COLOR]

4. Next you are going to go to your desktop, hold down shift and while holding shift down click open in command window here:

5. Now when your command window opens up it should look like this:
Resized to 90% (was 674 x 339) - Click p_w_picpath to enlarge[/COLOR]

6. Now you are going to have to copy this line and paste it into the CMD window (just replace the CPUKEY line with your cpukey): ibuild.exe x -d temp\ -p CPUKEY -b DD88AD0C9ED669E7B56794FB68563EFA original.bin and press enter.This is what your window should look like the red is supposed to be your cpukey (I blocked out mine)
Resized to 89% (was 675 x 339) - Click p_w_picpath to enlarge[/COLOR]

7. Now open up 9199.zip and put all the contents from the zip into the freeBOOT-0.031\data folder
Resized to 83% (was 727 x 1023) - Click p_w_picpath to enlarge[/COLOR]

8. Now go to freeBOOT-0.031\temp and take out these files from there and put them into the freeBOOT-0.031\data folder- crl.bin- crl.bin.meta- extended.bin- extended.bin.meta- kv.bin- odd.bin- odd.bin.meta- secdata.bin- secdata.bin.meta- smc_config.bin
Resized to 89% (was 679 x 1023) - Click p_w_picpath to enlarge[/COLOR]

9. Now open up Cygnos360 V2 SMC Collection.zip and pick the file that’s associated for your console and extract it. After you extract it rename the file to smc.bin Now put the smc.bin file into the freeBOOT-0.031\data folder
Resized to 59% (was 1023 x 589) - Click p_w_picpath to enlarge[/COLOR]

10. Now go to your CMD window and copy this line and paste it in and press enter: ibuild.exe c freeBOOT -c CONSOLE -d data\ -p CPUKEY -b DD88AD0C9ED669E7B56794FB68563EFA bin\p_w_picpath.bin bin\fuses.bin- Replace CONSOLE with your console name one of these: xenon, zephyr, falcon, jasper, jasper256 or jasper512- Once again replace CPUKEY with your cpukeyThis is what it should look like (The red is my cpukey and as you can see my console is a falcon so I wrote falcon in there):
Resized to 89% (was 675 x 338) - Click p_w_picpath to enlarge[/COLOR]

11. Your done now go to the freeboot-0.031\bin folder and you should see p_w_picpath.bin, This is your newly built nand p_w_picpath now go and flash it the way you prefer.
Resized to 76% (was 794 x 594) - Click p_w_picpath to enlarge[/COLOR]


**For flashing with XBR this should work (didnt test it):

Take the p_w_picpath.bin that was created from the freeboot-0.031\bin folder and rename it to updflash.bin Then put updflash.bin into a flash drive (USB Stick) Then run 360Flashtool from your 360 When in 360Flashtool press

**Button A - Write updflash.bin to Nand
** and thats it you should have a newly installed freeBOOT with 9199 kernal.

**If your avatars dont work after flashing freeBOOT from what I read (and what I assumed originally) you take the 9199 update and run it like any normal update. The xbox will recognize you have the 9199 update but that you are missing the avatar files so it will then just install the files needed for avatar supportOptional

:If you want xellous installed right before step 9 open up XeLLous_v1.0.zip XeLLous_v1.0[/COLOR] and extract xell-2f.bin and put that file into freeBOOT-0.031\bin (let it overwrite the old file) and then continue with step 10 and build your p_w_picpath.

I hope this helps clear the question for noobs such as me I just used some common sense to do this hope it helps enjoy freeboot and thanks to ikari for freeboot

*I am not responsible for ANYTHING that happens while following this guide

*If anything is incorrect please let me know so I can fix it I am in no way an expert at all and if I missed anything let me know. Cheers.

mervyn

楼主来一个评测吧！这回内存保护破解了，金手指指日可待，哈哈！

humor

哈哈 我还没有安装呢

该用户已被禁言

什么作用？？？？？？？？？？？？？？？？？

该用户已被禁言

修砖中。。。。。。。。。。。。。。。

该用户已被禁言

mervyn

希望能有一个详细的中文解说教程和评测，期待各位大大了！

sigmasun

靠，还是没说用Flash360刷的时候该保留KV和Config还是不保留。

怎么弄这教程自己都说没测试过，人偶问题也没测试过。

按他说的，一切问题自己负责，这谁敢弄。