10.83A Slim Trinity砖机丢原始固件，大神帮忙看看这还有救么？

skygunner

朋友的Trinity主板，搞RGH的时候搞坏了CLK电阻R3B15无法读取写入nand，按电源也无反应，就到了我手里
现已修复电阻，可正常读取写入nand

问题是没有原本的nand备份，我读取了两份存下，不知道是不是原厂nand
放入jrunner生成ecc：

1. 
   
2. ===================================================
   
3. Monday, September 17, 2018 11:02:00 AM
   
4. 
   
5. J-Runner v0.5 Started
   
6. 
   
7. 
   
8. WARNING! - Your selected working directory already contains files!
   
9. You can view these files by using 'Show Working Folder' Button
   
10. 
    
11. Initializing nanddump1.bin..
    
12. Trinity
    
13. Glitch2 Selected
    
14. Nand Initialization Finished
    
15. Comparing...
    
16. Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
    
17. Bad Block ID  013B Found @ 0x03FE [Offset: 0x1077C00]
    
18. Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
    
19. Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 013B [Offset: 0x513600]
    
20. Bad Blocks Remapped
    
21. Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
    
22. Bad Block ID  013B Found @ 0x03FE [Offset: 0x1077C00]
    
23. Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
    
24. Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 013B [Offset: 0x513600]
    
25. Bad Blocks Remapped
    
26. Nands are the same
    
27. CR4 Selected
    
28. * unpacking flash image, ....
    
29. Spare Data found, will remove.
    
30. Removed
    
31. * found decrypted CD
    
32. * found XeLL binary, must be linked to 0x1c000000
    
33. * we found the following parts:
    
34. SMC: 3.1
    
35. CB_A: 9188
    
36. CB_B: 9188
    
37. CD (image): 9452
    
38. CD (decrypted): 8453
    
39. * this image will be valid *only* for: trinity (slim)
    
40. * patching SMC...
    
41. ! Warning: can't patch this Trinity type SMC!
    
42. * patching CB_B...
    
43. patchset for 9188 found, 4 patch(es)
    
44. * constructing new image...
    
45. * base size: 70000
    
46. * No separate recovery Xell available!
    
47. * Flash Layout:
    
48. 0x0..0x1FF (0x200 bytes) Header
    
49. 0x200..0xFFF (0xE00 bytes) Padding
    
50. 0x1000..0x3FFF (0x3000 bytes) SMC
    
51. 0x4000..0x7FFF (0x4000 bytes) Keyvault
    
52. 0x8000..0x9ABF (0x1AC0 bytes) CB_A 9188
    
53. 0x9AC0..0x112BF (0x7800 bytes) CB_B 9188
    
54. 0x112C0..0x172BF (0x6000 bytes) CD 8453
    
55. 0x172C0..0xBFFFF (0xA8D40 bytes) Padding
    
56. 0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
    
57. 0x100000..0x13FFFF (0x40000 bytes) Xell (main)
    
58. * Encoding ECC...Done!
    
59. ------------- Written into output\image_00000000.ecc
    
60. 
    

复制代码

这CB 9188 , 6BL 14699
生成ecc的时候有一个警告  ! Warning: can't patch this Trinity type SMC!
这有没问题？

把这ECC写入nand，并修复坏块34，写入正常

1. 
   
2. del nandecc.bin
   
3. copy nanddump1.bin nandecc.bin
   
4. Nandpro usb: +w16 image_00000000.ecc
   
5. Nandpro nandecc.bin: +w16 image_00000000.ecc
   
6. del badblock1.bin
   
7. Nandpro nandecc.bin: -r16 badblock1.bin 34 1
   
8. timeout 4
   
9. Nandpro usb: -w16 badblock1.bin 3FF
   
10. pause
    

复制代码

nandpro写入ecc的时候并没有报34位置是坏块。

加IC X360ACE V3, S-RGH改法，刷好秒开脉冲文件，但是始终无法进入Xell

回头又试了把备份出来的nand文件刷回去(修复坏块)，
断开IC，开机不红灯，但是也无法进入系统，
风扇一直转，绿灯一直闪，不知道这个砖还有救么？

skygunner

这个是不是有个通用ecc可以让我试试？

weidongshan75

RGH2走线的  直接去找我之前帖子的通用固件写进去就行了

skygunner

感谢回复，不过好像通用固件下载链接失效了哈，不知道有没有备用链接可以提供一个吗?
或者是怎么做通用固件呢？