A9VG电玩部落论坛

 找回密码
 注册
搜索
查看: 4472|回复: 1

树莓zero刷BATOCERA,有个问题跪求解决方案

[复制链接]

精华
0
帖子
113
威望
0 点
积分
113 点
种子
0 点
注册时间
2017-11-25
最后登录
2024-3-27
 楼主| 发表于 2019-1-6 22:44  ·  江苏 | 显示全部楼层 |阅读模式
自制GB厚掌,买了3.5寸AV屏幕320*240分辨率,按键板和硅胶按键等等配件,原来刷retropie 4.3的打算GPIO来控制按键无奈进入进入manage driver packages>>manage driver packages>>mkarcade joystick>>install  安装完成后重启树莓插上按键板没反应,反反复复试了好几次放弃了实在不知道回事不成功
转刷BATOCERA,一切都很顺利,修改recalbox.conf后GPIO试下来OK,而且我也比较喜欢BATOCERA的风格界面但是问题来了貌似默认HDMI输入(HDMI接我的大液晶完全没问题),我的问题如下

1. BATOCERA是否能实现AV,用的是树莓zero,树莓山的AV两脚我已经引出来接到3.5寸屏幕上了,不显示,怎么弄才能AV输出到小屏幕上(最后附上recalbox.conf ),关于BATOCERA百度了下资料实在少之又少,实在没办法卡在这了,各位大虾帮我看看是否要在recalbox.conf中的“global.videomode=CEA 4 HDMI”上做文章??

2.原来刷的retropie 4.3 为何GPIO不成功,实在百思不得其姐!为何??retropie下反倒是引出的AV脚接3.5寸显示的杠杠的,TMD天杀的,这不是玩我么!!!!

在此跪谢!!

*******附上BATOCERA的   recalbox.conf,怎么弄法??******

# System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line



# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/ ... epi-board-plus-2015
;system.power.switch=WITTYPI             # http://www.uugear.com/witty-pi-r ... nt-for-raspberry-pi
;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/reca ... n-to-your-recalbox-(EN)
;system.power.switch=PIN56PUSH           # https://github.com/recalbox/reca ... n-to-your-recalbox-(EN)
;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/reca ... n-to-your-recalbox-(EN)

## Recalbox security
# enforce security
#   samba password required
#   disable virtual gamepads
system.security.enabled=0

## Recalbox API (REST)
system.api.enabled=0

## Allow a specific resolution for ES only from the command : tvservice -m [MODE]
## Leave commented for the default usual behaviour
;system.es.videomode=CEA 4 HDMI

## EmulationStation menu style
## default -> default all options menu
## none -> no menu except the game search menu
## bartop -> less menu, only needed for bartops
system.es.menu=default

## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default

## Show or hide kodi in emulationstation (0,1)
kodi.enabled=1
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=1

## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

# ------------ B - Network ------------ #
## Set system hostname
system.hostname=BATOCERA
## Activate wifi (0,1)
wifi.enabled=1
## Wifi SSID (string)
wifi.ssid=zhj
## Wifi KEY (string)
## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
## Escape your special chars (# ; $) with a backslash : $ => \$
wifi.key=enc:U2FsdGVkX19Ury8Gt+GV3Sdy79tbHMKzJGr2tEAf4do=

# secondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new key

# third wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new key

## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1

# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=auto
## Set system volume (0..100)
audio.volume=79
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1



# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1


## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose a driver between bluez, official and shanwan
## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
## official -> sixad drivers, support official and gasia sisaxis
## shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez

# PS4 bluetooth controllers
# controllers.ps4.enabled=0

# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=0
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2


# ------------ D3 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2


## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1)
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1

## XGaming's XArcade **stik and other compatible devices
controllers.xarcade.enabled=1



# ------------ F - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=zh_CN
## set the keyboard layout (fr,en,de,us,es)
;system.kblayout=us
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
;system.timezone=Europe/Paris



# ------------ G - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.
updates.type=stable


# ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator

## Set game resolution for emulators
## select your mode from the command : tvservice -m [MODE]
## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
## use 'default' for using the default resolution
## (string)
global.videomode=CEA 4 HDMI

## Shader set
## Automatically select shaders for all systems
##聽(none, retro, scanlines)
global.shaderset=none

## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0

## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=

# bezel
global.bezel=default

## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto

## Set smooth for all emulators (0,1)
global.smooth=1

## Set rewind for all emulators (0,1)
global.rewind=0

## Set autosave/load savestate for all emulators (0,1)
global.autosave=0

## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.leaderboards=0
global.retroachievements.verbose=0
global.retroachievements.screenshot=0
global.retroachievements.username=
global.retroachievements.password=

## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto

## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg

# ------------ I - EMULATORS CHOICES ----------- #
## You can override the global configuration here
## Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=pocketsnes
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator :
;snes.configfile=/path/to/my/configfile.cfg

## Default ** for RPi1
snes.core=pocketsnes
gba.core=gpsp
mame.core=imame4all
nes.core=fceumm

## NeoGeo emulator
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=fba2x
## If you set libretro as neogeo.emulator, uncomment the line below and set the retroarch core (fba,imame4all)
;neogeo.core=fba

# scrapper
# Comma seperated order to prefer images, s=snapshot, b=boxart, f=fanart, a=banner, l=logo, 3b=3D boxart
;scrapper.style=s,b,f,a,l,3b

# amiga
amiga500.emulator=amiberry
amiga500.core=A500
amiga500p.emulator=amiberry
amiga500p.core=A500P
amiga1200.emulator=amiberry
amiga1200.core=A1200
amiga4000.emulator=amiberry
amiga4000.core=A4000
amigacd32.emulator=amiberry
amigacd32.core=CD32

## Configurations generated by Recalbox


********到此结束******************************************

精华
0
帖子
113
威望
0 点
积分
113 点
种子
0 点
注册时间
2017-11-25
最后登录
2024-3-27
 楼主| 发表于 2019-1-8 08:55  ·  江苏 | 显示全部楼层
只有自顶下了,大神指导下啊,谢谢!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|A9VG电玩部落 川公网安备 51019002005286号

GMT+8, 2024-12-5 12:51 , Processed in 0.188402 second(s), 10 queries , Redis On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

返回顶部