有人用DH0.51么？

该用户已被禁言

大家还用0.46吗？0.51已经放出了，成功完美的模拟了3.01，不知道不同版本可不可以直接打补丁.

-saber-

听说还要刷机啊？～～～

蕾娜斯

什么 = =  0.50不是说有BUG吗 0.51又出了

-saber-

下面是引用蕾娜斯于2006-12-05 13:00发表的:
什么 = =  0.50不是说有BUG吗 0.51又出了

是啊，修正了bug

蕾娜斯

下面是引用-saber-于2006-12-05 13:02发表的:

是啊，修正了bug

观望吧 穷人 刷出毛病就不好了

该用户已被禁言

有傻瓜包下载了没有

rongshoo

有没好人给个地止下载的说

delacroix88

步驟如下:
1. 在MS卡里移除所有舊版本的DEVHOOK
2. 複製DEVHOOK0.51 的安裝包到MS卡的根目錄下，ms0:/ 下應有2個資料夾，一個為"dh"，另一個為"PSP"
3. 下載 3.01升級包 (本帖已經提供下載連接)
4. 下載 PSARDumper (本帖已經提供下載連接)
5. 用PBP Unpacker 等軟件從3.01升級包里解压出 "DATA.PSAR"，完成後，複製"DATA.PSAR" 到MS卡的根目錄下
6. 在你的PSP 上咝蠵SARDumper, 當他載入時按下"X" 會轉儲一個已經驗証過的 3.01出來。完成後PSP 會回到主菜單
7. 進入MS卡，你現在會看見根目錄里有 "F0"這個資料夾，將301的資料夾移動到 "dh" 里
8. 進入"301"目錄里，將"reboot.bin" 移動到 F0 資料夾里
9. 啟動DEVHOOK 然後進入"FLASH ROM" 設定，選擇安裝 dh 到 flash1 上，不要進入其他的設定除非你懂怎樣設定
10. 最後，在DEVHOOK 的菜單里選擇"FIREWARE" 的3.01，然後就會啟動DEVHOOK 了!

KABOOM! The man himself, BOOSTER, is back with yet another phenomenal accomplishment — 3.01 firmware emulation via DevHook v0.51. Only days ago v0.50 was made available; now we present you with this earth shattering, mind blowing, wig splitting release.

Here are easy to follow instructions, courtesy of comment #40, posted by Steven-style:

  1. Remove all previous DevHook files from your memory stick.
  2. Copy the DevHook 0.51 package to the root of your memory stick. This would be ms0:/ and the two folders should be “dh” and “PSP”.
  3. Download the 3.01 update (search Google) or PSP Hacks.
  4. Get PSARDumper
  5. Extract the DATA.PSAR from the 3.01 update you’ve downloaded with a program such as PBP Unpacker. Once thats done, copy the DATA.PSAR over to the root of your memory stick.
  6. Run PSARDumper on your PSP, once its loaded up press X to dump a sigchecked 3.01. Once its done your PSP will return to the main menu.
  7. Open up your memory stick, you will now see that there is an “F0〃 folder in the root. Move that to the “301〃 folder inside of “dh”.
  8. Go into the “301〃 directory, move the reboot.bin into the f0 folder.
  9. Launch up DevHook and go to “FLASH ROM” settings, choose install dh to flash1. DO NOT touch any of the other settings unless you know what you’re doing.
  10. Finally, choose “FIRMWARE” from the DevHook menu and pick 3.01. Now start DevHook and you should be good to go!

Thanks Steven, and of course BOOSTER — unbelievable job!

You can also fetch the modified PSAR dumper (to dump/decrypt) and corresponding 3.01 update EBOOT below.

下載地址
Devhook 0.51
http://www.psp-hacks.com/file/933
3.01 Update EBOOT
http://www.psp-hacks.com/file/934
Modified PSAR Dumper
http://www.psp-hacks.com/file/918
PBP Unpacker
http://www.psp-hacks.com/file/97

蕾娜斯

= =  观望一下吧   　

-saber-

下面是引用delacroix88于2006-12-05 14:23发表的DevHook 0.51 支援 3.01 Firmware:
步驟如下:
1. 在MS卡里移除所有舊版本的DEVHOOK
2. 複製DEVHOOK0.51 的安裝包到MS卡的根目錄下，ms0:/ 下應有2個資料夾，一個為"dh"，另一個為"PSP"
3. 下載 3.01升級包 (本帖已經提供下載連接)
4. 下載 PSARDumper (本帖已經提供下載連接)
.......

复杂